oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /lumber-api

Lumber Calculator API

salutare 4,756 Abbonati

Lumber and framing material-estimation maths as an API, computed locally and deterministically. The boardfeet endpoint computes board feet — the standard volume unit for sawn timber, (thickness_in × width_in × length_ft) ÷ 12 — for a quantity of boards, with the total board feet and linear feet. The studs endpoint frames a wall: the number of vertical studs, ceil(wall length ÷ spacing) + 1 (16-inch ≈ 0.4064 m or 24-inch ≈ 0.6096 m centres), with two extra studs per opening, plus the plate boards for the top and bottom plates. The cost endpoint totals the lumber either by board foot (board feet × price per board foot) or by piece (pieces × price per piece). Everything is computed locally and deterministically, so it is instant and private. Ideal for construction, carpentry and DIY app developers, framing and material take-off tools, and lumberyard and builder calculators. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is lumber and framing estimation; for drywall sheets use a drywall API and for concrete use a concrete API.

#lumber #board-feet #framing #construction #carpentry #developer-tools
api.oanor.com/lumber-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/lumber-api/openapi.json
/api/lumber-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

Lumber Calculator API — live data on the oanor API marketplace

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
76 ms
Sondaggi del server · 24 ore su 24
Abbonati
4,756
attiva
Chiamate totali
80
ultimi 7 giorni
status Pagina di stato completa → · 16 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 2,000 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 23,535 calls/mese
  • 2 req/sec
  • Piedi tavola + montanti + costo
  • Nessuna carta di credito
Accedi per abbonarti

Starter

€9.00 /mese

  • 25,000 chiamate/mese
  • 5 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 34.85k calls/month
  • 8 req/sec
  • Framing counts, plate boards
  • Email support
Accedi per abbonarti

Pro

€24.00 /mese

  • 150,000 chiamate/mese
  • 20 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 382.5k calls/month
  • 20 req/sec
  • Carpentry & take-off pipelines
  • Priority support
Accedi per abbonarti

Mega

€75.00 /mese

  • 900,000 chiamate/mese
  • 60 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.955M llamadas/mes
  • 50 req/seg
  • Escala de plataforma
  • SLA dedicado
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Deck Builder API — oanor API marketplace

Deck Builder API

Deck-building maths as an API, computed locally and deterministically — the board, joist and fastener counts a homeowner or contractor needs to material out a rectangular deck. The boards endpoint turns the deck size into a real shopping list: rows = deck width ÷ (board width + gap), rounded up, so a 16 ft × 12 ft deck with a 5.5-inch board face (a 5/4×6) and a 1/8-inch gap needs 26 rows; boards run the length, each row takes one 16 ft board, and a 10 % waste allowance brings it to 29 boards plus the linear footage and the deck area. The joists endpoint frames it: joists are spaced along the length, so count = ⌊length ÷ spacing⌋ + 1 — thirteen joists at 16-inch on-center (seventeen at 12-inch for stronger or diagonal decking), each spanning the width, plus two rim joists and a ledger as total framing linear feet. The fasteners endpoint counts the screws: every decking row crosses every joist once and is fastened with two face screws there, so a 16×12 deck takes 26 × 13 × 2 = 676 screws, about 744 with waste — or one hidden clip per intersection. Everything is computed locally and deterministically, so it is instant and private. Ideal for construction, contractor, home-improvement, building-materials and renovation app developers, deck-estimator and takeoff tools, and lumber-yard calculators. Pure local computation — no key, no third-party service, instant. US units (feet/inches). Live, nothing stored. 3 compute endpoints. Rectangular decks; for indoor floor area use a flooring API.

api.oanor.com/deck-api

 Picture Framing API — oanor API marketplace

Picture Framing API

Picture-framing maths as an API, computed locally and deterministically — the mat-cutting and moulding numbers a framer or artist measures a job by. The mat endpoint sizes the mat board around an artwork: the window opening is the art minus a small overlap on each edge (≈ 0.25 inch so the mat holds the print), and the outer mat is the window plus the border widths — give one border or per-side borders, with a heavier bottom for a balanced, bottom-weighted mat, so an 8×10 print with a 2-inch border has a 7.5×9.5 window and an 11.5×13.5 mat. The moulding endpoint computes the frame stick needed: length = inner perimeter + 8 × the moulding width, because each of the four 45-degree mitred corners adds one moulding width — an 11.5×13.5 frame in 1.5-inch moulding needs 62.5 inches, plus any waste allowance. Everything is computed locally and deterministically, so it is instant and private. Ideal for picture-framing, custom-framing, art-gallery and DIY app developers, mat-cutter and moulding-estimating tools, and framing education. Pure local computation — no key, no third-party service, instant. Imperial inches in; lengths in inches and feet. Live, nothing stored. 2 compute endpoints. A planning aid — measure twice, cut once.

api.oanor.com/framing-api

 Handrail & Baluster API — oanor API marketplace

Handrail & Baluster API

Railing and baluster layout maths as an API, computed locally and deterministically — the baluster-count, spacing and post numbers a deck builder, fabricator or balustrade designer sets a guardrail out with. The baluster-count endpoint gives the smallest number of balusters that keeps every gap within the safety limit: between two posts n balusters leave n+1 gaps, so the count = ceil((rail length − max gap) ÷ (baluster width + max gap)). The usual guardrail limit is a 100 mm (4-inch) sphere — a child-safety rule — so a 2000 mm rail with 40 mm balusters needs 14 of them at even 96 mm gaps; round up, because one fewer opens the gaps past the limit. The layout endpoint sets out a known count evenly: the gap = (rail length − total baluster width) ÷ (count + 1), the centre-to-centre pitch = baluster width + gap, and the first baluster's centre sits one gap plus half a baluster from the post face, so you mark the first centre and step off the pitch with the last gap landing equal to the first. The post-count endpoint sizes the frame: a run needs one more post than spans, spans = ceil(run ÷ max post spacing), posts = spans + 1, even spacing = run ÷ spans — a 6 m run at a 1.8 m max takes 4 spans and 5 posts at a tidy 1.5 m. Everything is computed locally and deterministically, so it is instant and private. Ideal for deck and balustrade design tools, fabrication and estimating apps, and building calculators. Pure local computation — no key, no third-party service, instant. Uses the common 100 mm infill rule — confirm your local code. 3 compute endpoints. For stair rise and run use a stair API; for fence pickets a fence API.

api.oanor.com/handrail-api

 Arch Geometry API — oanor API marketplace

Arch Geometry API

Circular-segment arch geometry as an API, computed locally and deterministically — the radius, arc-length and set-out numbers a mason, joiner, stonemason or CAD user lays a segmental arch out with. A segmental arch is an arc of a circle struck through the two springings and the crown: the from-span-rise endpoint takes the span and the rise (the height of the crown above the springing line) and returns the radius = (span²/4 + rise²) ÷ (2·rise), the central angle it subtends, the arc length along the curve, and the segment area of the void below it — flatter arches with a small rise have surprisingly huge radii. The from-radius-angle endpoint inverts it, returning the chord (span), the rise (sagitta), the arc length and the area from a known radius and central angle, the way a curve struck with a trammel or a router on a pivot is described. The setout-ordinates endpoint gives the practical numbers to mark a template: the rise of the arc above a straight base line at equally spaced stations across the span (y = √(R² − x²) − (R − rise)), so you can plot the heights, connect them and cut a plywood former or bend a batten without a giant compass — the ends come out zero at the springings and the middle equals the rise at the crown. Everything is computed locally and deterministically, so it is instant and private. Ideal for masonry and joinery layout tools, stair and window-head design, and CAD and woodworking calculators. Pure local computation — no key, no third-party service, instant. Segmental (up to a semicircle) arcs. 3 compute endpoints. For road curves use a horizontal- or vertical-curve API; for plain shape areas a geometry API.

api.oanor.com/arch-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Lumber Calculator API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Lumber Calculator API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Lumber Calculator API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Lumber Calculator API?
Lumber Calculator API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €9.00 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Lumber Calculator API è conforme al GDPR?
Tutte le richieste a Lumber Calculator API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/lumber-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/lumber-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/lumber-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/lumber-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.