oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /chimney-api

Chimney & Flue API

salutare 3,284 Abbonati

Chimney and flue sizing maths as an API, computed locally and deterministically — the draft and dimension numbers a stove installer, sweep or builder runs so a fire pulls cleanly and safely. The flue-size endpoint gives the minimum flue cross-section for a fireplace opening: at least a tenth of the opening area for a square or rectangular liner, a twelfth for a round one (which draws better) — a 36 × 30 inch opening needs about 108 square inches of rectangular flue, or a 10.7-inch round. The draft endpoint gives the theoretical draft from the stack effect, ΔP ≈ 3465 × height × (1/T_outside − 1/T_flue) with temperatures in kelvin, so a 6-metre chimney with 200 °C flue gas on a freezing day pulls about 32 pascals (0.13 inches of water column) — taller and hotter draws harder. The height endpoint applies the 3-2-10 rule: a chimney must finish at least 3 feet above where it pierces the roof and at least 2 feet above anything within 10 feet, whichever is higher. Everything is computed locally and deterministically, so it is instant and private. Ideal for hearth and stove-installer apps, chimney-sweep and inspection tools, building-design calculators, and DIY-safety sites. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 compute endpoints. Educational estimates — verify against your appliance listing and adopted code.

#chimney #flue #draft #stove #construction #developer-tools
api.oanor.com/chimney-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/chimney-api/openapi.json
/api/chimney-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

Chimney & Flue API — live data on the oanor API marketplace

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
80 ms
Sondaggi del server · 24 ore su 24
Abbonati
3,284
attiva
Chiamate totali
76
ultimi 7 giorni
status Pagina di stato completa → · 12 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 420 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 420 Aufrufe/Monat
  • 2 req/sec
  • Flue size + draft + height
  • Keine Kreditkarte
Accedi per abbonarti

Starter

€5.25 /mese

  • 11,000 chiamate/mese
  • 6 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 11.000 Aufrufe/Monat
  • 6 req/sec
  • Kamineffekt-Zug
  • E-Mail-Support
Accedi per abbonarti

Pro

€17.20 /mese

  • 72,000 chiamate/mese
  • 15 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 72.000 Aufrufe/Monat
  • 15 req/sec
  • Installations- und Inspektions-Pipelines
  • Prioritäts-Support
Accedi per abbonarti

Mega

€51.60 /mese

  • 245,000 chiamate/mese
  • 36 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 245.000 Aufrufe/Monat
  • 36 req/sec
  • Plattform-Skalierung
  • Dedizierte SLA
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Handrail & Baluster API — oanor API marketplace

Handrail & Baluster API

Railing and baluster layout maths as an API, computed locally and deterministically — the baluster-count, spacing and post numbers a deck builder, fabricator or balustrade designer sets a guardrail out with. The baluster-count endpoint gives the smallest number of balusters that keeps every gap within the safety limit: between two posts n balusters leave n+1 gaps, so the count = ceil((rail length − max gap) ÷ (baluster width + max gap)). The usual guardrail limit is a 100 mm (4-inch) sphere — a child-safety rule — so a 2000 mm rail with 40 mm balusters needs 14 of them at even 96 mm gaps; round up, because one fewer opens the gaps past the limit. The layout endpoint sets out a known count evenly: the gap = (rail length − total baluster width) ÷ (count + 1), the centre-to-centre pitch = baluster width + gap, and the first baluster's centre sits one gap plus half a baluster from the post face, so you mark the first centre and step off the pitch with the last gap landing equal to the first. The post-count endpoint sizes the frame: a run needs one more post than spans, spans = ceil(run ÷ max post spacing), posts = spans + 1, even spacing = run ÷ spans — a 6 m run at a 1.8 m max takes 4 spans and 5 posts at a tidy 1.5 m. Everything is computed locally and deterministically, so it is instant and private. Ideal for deck and balustrade design tools, fabrication and estimating apps, and building calculators. Pure local computation — no key, no third-party service, instant. Uses the common 100 mm infill rule — confirm your local code. 3 compute endpoints. For stair rise and run use a stair API; for fence pickets a fence API.

api.oanor.com/handrail-api

 Arch Geometry API — oanor API marketplace

Arch Geometry API

Circular-segment arch geometry as an API, computed locally and deterministically — the radius, arc-length and set-out numbers a mason, joiner, stonemason or CAD user lays a segmental arch out with. A segmental arch is an arc of a circle struck through the two springings and the crown: the from-span-rise endpoint takes the span and the rise (the height of the crown above the springing line) and returns the radius = (span²/4 + rise²) ÷ (2·rise), the central angle it subtends, the arc length along the curve, and the segment area of the void below it — flatter arches with a small rise have surprisingly huge radii. The from-radius-angle endpoint inverts it, returning the chord (span), the rise (sagitta), the arc length and the area from a known radius and central angle, the way a curve struck with a trammel or a router on a pivot is described. The setout-ordinates endpoint gives the practical numbers to mark a template: the rise of the arc above a straight base line at equally spaced stations across the span (y = √(R² − x²) − (R − rise)), so you can plot the heights, connect them and cut a plywood former or bend a batten without a giant compass — the ends come out zero at the springings and the middle equals the rise at the crown. Everything is computed locally and deterministically, so it is instant and private. Ideal for masonry and joinery layout tools, stair and window-head design, and CAD and woodworking calculators. Pure local computation — no key, no third-party service, instant. Segmental (up to a semicircle) arcs. 3 compute endpoints. For road curves use a horizontal- or vertical-curve API; for plain shape areas a geometry API.

api.oanor.com/arch-api

 Mobile Crane Lift API — oanor API marketplace

Mobile Crane Lift API

Mobile-Crane-Lift-Planungsmathematik als API, lokal und deterministisch berechnet – die Lastmoment-, Kippkapazitäts- und Abstützplattenzahlen, die ein Kranführer, Liftplaner oder Rigging-Ingenieur bei einem Hub überprüft. Der Lastmoment-Endpunkt gibt die Last × ihren Arbeitsradius (den horizontalen Abstand vom Drehzentrum zum Haken), die einzelne Zahl, die der Tragfähigkeitsbegrenzer eines Krans überwacht: Eine 5-Tonnen-Last bei 8 m ergibt ein Moment von 40 Tonnenmetern, dasselbe wie 10 Tonnen bei 4 m, weshalb die Diagrammkapazität steil abfällt, wenn der Ausleger ausfährt – das Moment, nicht das Gewicht, kippt den Kran. Der Kapazitätsendpunkt gibt eine vereinfachte Kippbilanz um den Drehpunkt: Die Last, die gerade kippt = Gegengewicht × sein Radius ÷ Lastradius, und die zulässige sichere Last ist ein Stabilitätsbruchteil davon (~75 % auf Abstützungen, ~66 % auf Raupen gemäß den Normen) – eine Lehr-/Plausibilitätszahl, die den Ausleger und das Überbaugerät ignoriert, niemals ein Ersatz für das Lastdiagramm. Der Abstützplattenendpunkt dimensioniert die Tellerplatte: Erforderliche Plattenfläche = Abstützbeinlast ÷ zulässiger Bodendruck (und die Seite einer quadratischen Matte), da Überlastung von schwachem Boden eine Hauptursache für Umkippen ist – ein 30-Tonnen-Bein auf 200 kPa benötigt etwa eine 1,2 m quadratische Matte. Alles wird lokal und deterministisch berechnet, daher ist es sofort und privat. Ideal für Liftplanungs- und Rigging-Tools, Bau- und Kranbetriebs-Apps sowie Baustellensicherheitsdienstprogramme. Reine lokale Berechnung – kein Key, kein Drittanbieterdienst, sofort. Vereinfacht – verwenden Sie immer das Lastdiagramm des Herstellers. 3 Compute-Endpunkte. Verwenden Sie für Anschlag- und WLL-Lasten eine Rigging-API.

api.oanor.com/crane-api

 Ladder Safety API — oanor API marketplace

Ladder Safety API

Ladder-safety maths as an API, computed locally and deterministically — the angle, reach and load numbers that keep a ladder from sliding out or buckling. The angle endpoint applies the 4:1 rule: the base goes out one foot for every four feet of working length, which lands the ladder at about 75.5° — a 24-foot ladder sits 6 feet from the wall and reaches roughly 23 feet up, steep enough not to tip back and shallow enough not to slide. The extension endpoint gives the usable length and reach of a two-section extension ladder, which loses the overlap the sections share (3 feet up to 36, 4 to 48, 5 beyond), and the working height at the safe angle — remembering the ladder must extend 3 feet above a roof edge you step onto. The duty-rating endpoint turns a total load — your weight plus tools and materials, not just bodyweight — into the right duty class, from Type III household (200 lb) through I industrial (250) to IAA professional (375). Everything is computed locally and deterministically, so it is instant and private. Ideal for construction-safety and trades apps, jobsite and rental tools, OSHA training aids, and home-improvement sites. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 compute endpoints. Educational — always follow the manufacturer's labels and OSHA/ANSI rules.

api.oanor.com/ladder-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Chimney & Flue API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Chimney & Flue API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Chimney & Flue API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Chimney & Flue API?
Chimney & Flue API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €5.25 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Chimney & Flue API è conforme al GDPR?
Tutte le richieste a Chimney & Flue API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/chimney-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/chimney-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/chimney-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/chimney-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.