oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /canning-api

Home Canning API

salutare 4,575 Abbonati

Home-canning maths as an API, computed locally and deterministically — the altitude adjustments that keep a batch of preserves safe, the numbers a canner, homesteader or recipe app processes a jar by. Because water boils cooler the higher you are, every tested sea-level recipe has to run longer or hotter, and this API does that arithmetic. The waterbath endpoint applies the USDA boiling-water-bath and steam-canner rule: for a base process of 20 minutes or less add 5, 10, 15 or 20 minutes by altitude band, and for more than 20 minutes add 10, 20, 30 or 40 — so a 15-minute pickle recipe at 4,000 feet processes 25 minutes, and a 30-minute one runs 50. The pressure endpoint adjusts the canner: a dial gauge gains 1 psi per 2,000 feet, turning an 11 psi recipe into 12, 13, 14 or 15, while a weighted gauge simply steps from 10 psi up to 1,000 feet to 15 above it, since it only has 5/10/15 settings. The boilingpoint endpoint gives the underlying reason — water boils about 1.84 °F lower per 1,000 feet, so 5,000 feet boils at 202.8 °F instead of 212. Everything is computed locally and deterministically, so it is instant and private. Ideal for canning, food-preservation, homesteading, recipe and kitchen app developers, preserving-calculator and pantry tools, and cooking-class software. Pure local computation — no key, no third-party service, instant. USDA tables — always follow a tested recipe. Live, nothing stored. 3 compute endpoints.

#canning #food-preservation #homesteading #cooking #altitude #developer-tools
api.oanor.com/canning-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/canning-api/openapi.json
/api/canning-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

Home Canning API — live data on the oanor API marketplace

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
72 ms
Sondaggi del server · 24 ore su 24
Abbonati
4,575
attiva
Chiamate totali
76
ultimi 7 giorni
status Pagina di stato completa → · 12 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 7,150 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 7.150 Aufrufe/Monat
  • 2 req/sec
  • Wasserbad + Druck + Siedepunkt
  • Keine Kreditkarte
Accedi per abbonarti

Starter

€4.08 /mese

  • 58,500 chiamate/mese
  • 6 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 58.500 Aufrufe/Monat
  • 6 req/sec
  • Zifferblatt- und Gewichtsanzeigen, ft/m
  • E-Mail-Support
Accedi per abbonarti

Pro

€11.35 /mese

  • 237,000 chiamate/mese
  • 15 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 237.000 Aufrufe/Monat
  • 15 req/sec
  • Rezept- und Konservierungs-App-Pipelines
  • Prioritäts-Support
Accedi per abbonarti

Mega

€36.40 /mese

  • 1,358,000 chiamate/mese
  • 40 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.358.000 Aufrufe/Monat
  • 40 req/sec
  • Plattform-Skalierung
  • Dedizierte SLA
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Jam & Preserve API — oanor API marketplace

Jam & Preserve API

Jam and preserve maths as an API, computed locally and deterministically — the sugar, setting-point and yield numbers a jam maker, preserver or recipe app works a batch to. The sugar endpoint sets the sugar from the sugar-to-fruit ratio: a traditional full-sugar jam is 1:1, so 1 kg of fruit takes 1 kg of sugar for a 2 kg batch at 50 % sugar, while lower ratios (0.6–0.75) make a softer, fresher, less-sweet preserve that needs added pectin and keeps less well — the sugar both preserves and helps the gel. The setting-point endpoint gives the gel temperature adjusted for altitude: jam sets at about 4.5 °C (8 °F) above the temperature water boils at — 104.5 °C at sea level — but because water boils lower as you climb (roughly 1 °C per 285 m), the target falls to near 99 °C at 1500 m, so cooking to the sea-level figure up a mountain over-boils the batch. The yield endpoint boils the batch down to a target soluble-solids (Brix): jam keeps at about 65 % Brix, the finished weight = the solids (sugar plus the fruit's own ~10 % dry matter) ÷ the target Brix, and the rest evaporates as water — 1 kg sugar and 1 kg fruit boils down to about 1690 g of jam, losing roughly 310 g of water. Everything is computed locally and deterministically, so it is instant and private. Ideal for preserving and recipe tools, homestead and kitchen apps, and food-production calculators. Pure local computation — no key, no third-party service, instant. Gel chemistry, not canning safety. 3 compute endpoints. For processing-time altitude adjustment use a canning API.

api.oanor.com/jam-api

 Egg Incubation API — oanor API marketplace

Egg Incubation API

Egg-incubation maths as an API, computed locally and deterministically — the hatch timeline, conditions and brooder numbers a hatchery or backyard chicken-keeper raises a clutch by. The hatch endpoint turns the set day (day 0) into the schedule by species: it knows the incubation period — chicken 21 days, duck 28, quail 17, goose 30, turkey 28, Muscovy 35 and more — and gives the lockdown day, about three days before hatch, when you stop turning the eggs, raise the humidity and leave the lid shut; pass a custom incubation_days for anything else. The conditions endpoint gives the targets: a forced-air incubator at 99.5 °F (still-air a degree or two higher at the top of the eggs), with humidity around 45–55 % through incubation and 65–75 % at lockdown so the membrane stays soft. The brooder endpoint schedules the chicks after they hatch — 95 °F under the lamp in week one, dropping 5 °F a week until they reach room temperature around 70 °F and are feathered enough to leave it. Everything is computed locally and deterministically, so it is instant and private. Ideal for poultry, hatchery, homesteading and farm app developers, incubation-timer and brooder tools, and 4-H / education software. Pure local computation — no key, no third-party service, instant. Guidance — candle the eggs and watch the chicks. Live, nothing stored. 3 compute endpoints.

api.oanor.com/incubation-api

 Vegetable Fermentation API — oanor API marketplace

Vegetable Fermentation API

Vegetable lacto-fermentation maths as an API, computed locally and deterministically — the salt numbers a fermenter weighs sauerkraut, kimchi and pickles by. (Vegetables, not meat — for cure and nitrite that is a separate calculation.) Salt is the whole game: too little and the wrong microbes win, too much and the ferment stalls. The salt endpoint does the dry-salt method for shredded veg, salt = vegetable weight × percent, with about 2 % being the classic sauerkraut and kimchi target — so a kilo of cabbage takes 20 grams — and it bands the result from low-and-fast to a near salt-cure. The brine endpoint sizes a submerged ferment, salt = water weight × percent where the percent is of the water as recipes state it (1 ml water ≈ 1 g), so a litre at 5 % needs 50 grams for a standard sour pickle, 3.5 % for a milder one; it also reports the salinity as a percent of the total solution. The salinity endpoint converts the two ways the same brine is expressed — percent of water versus percent of total — so a 5 %-of-water brine reads about 4.76 % on a refractometer. Everything is computed locally and deterministically, so it is instant and private. Ideal for fermentation, homesteading, recipe and food app developers, ferment-calculator and batch tools, and culinary software. Pure local computation — no key, no third-party service, instant. Grams and ml. Live, nothing stored. 3 compute endpoints.

api.oanor.com/fermentation-api

 Chicken Coop API — oanor API marketplace

Chicken Coop API

Backyard-chicken housing maths as an API, computed locally and deterministically — the coop, run and fixture numbers a flock keeper builds to. The space endpoint sizes the housing from the flock and the breed: about 4 ft² of coop floor per standard hen (2 for bantams, 5 for heavy breeds) plus roughly 10 ft² of run each, so ten standard hens want a 40 ft² coop and a 100 ft² run — and given a coop width it returns the length, or zero run for birds that free-range and only roost inside. The fixtures endpoint covers the inside: one nest box per three to four hens (they share and queue, so ten hens need three), 8–12 inches of roost bar per bird (ten birds ≈ 8.3 feet), about 4 inches of linear feeder space each, and a waterer per eight or so birds. Crowding is the root of pecking, disease and mess, so every figure rounds up and more space is always better; roosts should sit higher than the nest boxes so the birds don’t sleep — and soil — in them. Everything is computed locally and deterministically, so it is instant and private. Ideal for homesteading, backyard-poultry, farm and smallholding app developers, coop-planner and flock-management tools, and self-sufficiency software. Pure local computation — no key, no third-party service, instant. US units, rules of thumb. Live, nothing stored. 2 compute endpoints. For feed quantities use a different API.

api.oanor.com/chickencoop-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Home Canning API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Home Canning API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Home Canning API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Home Canning API?
Home Canning API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €4.08 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Home Canning API è conforme al GDPR?
Tutte le richieste a Home Canning API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/canning-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/canning-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/canning-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/canning-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.