oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /rectifier-api

Rectifier Ripple API

salutare 4,340 Abbonati

Rectifier ripple and smoothing-capacitor maths as an API, computed locally and deterministically. The ripple endpoint computes the peak-to-peak ripple voltage left on a reservoir (smoothing) capacitor after a rectifier, Vr = I_load/(f_ripple·C), where the ripple frequency is the line frequency for a half-wave rectifier and twice it for a full-wave or bridge rectifier — and it solves for whichever of the load current, the capacitance or the ripple you leave out, also giving the RMS ripple. The capacitor endpoint sizes the smoothing capacitor for a target ripple, C = I_load/(f_ripple·Vr), and the energy it stores. The output endpoint gives the DC output of the rectifier from the transformer RMS voltage: the peak Vrms·√2, minus the diode drops in the conduction path (one for half-wave and centre-tapped, two for a bridge), the average DC voltage and, given the ripple, the ripple factor. Everything is computed locally and deterministically, so it is instant and private. Ideal for power-supply and electronics-design tools, linear PSU, charger and audio-amplifier design, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is rectifier ripple and filtering; for Ohm's law, reactance and RC time constants use an Ohm's-law API.

#rectifier #ripple #power-supply #electronics #smoothing-capacitor #developer-tools
api.oanor.com/rectifier-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/rectifier-api/openapi.json
/api/rectifier-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

Rectifier Ripple API — live data on the oanor API marketplace

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
80 ms
Sondaggi del server · 24 ore su 24
Abbonati
4,340
attiva
Chiamate totali
76
ultimi 7 giorni
status Pagina di stato completa → · 12 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 2,000 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 19,935 calls/month
  • 2 req/sec
  • Ripple + capacitor + output
  • No credit card
Accedi per abbonarti

Starter

€9.00 /mese

  • 25,000 chiamate/mese
  • 5 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 31.25k llamadas/mes
  • 8 req/seg
  • Medio/completo/puente, factor de ondulación
  • Soporte por correo electrónico
Accedi per abbonarti

Pro

€24.00 /mese

  • 150,000 chiamate/mese
  • 15 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 346.5k calls/month
  • 20 req/sec
  • Power-supply design pipelines
  • Priority support
Accedi per abbonarti

Mega

€74.00 /mese

  • 793,000 chiamate/mese
  • 40 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.775M llamadas/mes
  • 50 req/seg
  • Escala de plataforma
  • SLA dedicado
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

XRP Ledger (XRPL) API — oanor API marketplace

XRP Ledger (XRPL) API

Live on-chain data from the XRP Ledger (XRPL), the decentralized blockchain behind XRP, served straight from public XRPL nodes by JSON-RPC — no key, nothing cached. The account endpoint returns any address's core state: its XRP balance, transaction sequence, the number of objects it owns, and its account flags and domain — the genesis-era account rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh holds tens of thousands of XRP. The balances endpoint returns the full wallet: the XRP balance plus every issued-currency trustline (token or stablecoin) the account holds, with the issuer, currency and amount, decoding hex currency codes to readable tickers. The transactions endpoint returns the account's most recent ledger activity — payments, DEX offers, trustline changes — each with its hash, type, amount, fee, result and time. The server endpoint returns the state of the ledger itself: the latest validated ledger index and age, the base and per-object XRP reserves, the current fee and the node software version — the network health a wallet or explorer needs. Everything is read live from the XRPL, nothing stored. This is the XRP Ledger on-chain layer for any wallet, explorer, exchange, payments or analytics app. Distinct from EVM and Solana on-chain APIs and from price feeds — this is XRPL account state, token balances, transactions and ledger health. 4 endpoints, no key on our side.

api.oanor.com/xrpl-api

 Zener Regulator API — oanor API marketplace

Zener Regulator API

Zener-diode voltage-regulator electronics maths as an API, computed locally and deterministically. The series-resistor endpoint sizes the series (dropping) resistor for a shunt Zener regulator, Rs = (Vin − Vz)/(Iz + Il), from the input voltage, the Zener voltage, the load current and the desired Zener (knee) current, and gives the power the resistor and the Zener must dissipate — the core design step so the diode stays in regulation at maximum load. The regulator endpoint analyses an existing regulator: from the input voltage, the Zener voltage, the series resistor and the load (as a current or a resistance) it computes the total current, the Zener current Iz = (Vin − Vz)/Rs − Il, the load current, the output voltage and whether the regulator is still regulating (Iz > 0) or has dropped out under heavy load. The power endpoint computes the Zener power dissipation P = Vz·Iz and the maximum safe current Iz_max = Pz_max/Vz from the diode's power rating. Voltages are in volts, currents in amperes, resistances in ohms and power in watts. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, power-supply, hobbyist and embedded app developers, regulator-design and reference-voltage tools, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is the Zener shunt regulator; for BJT biasing use a transistor API and for an LED series resistor an LED-resistor API.

api.oanor.com/zener-api

 Newegg API — oanor API marketplace

Newegg API

Live-Produktsuche von Newegg.com, dem großen Elektronik- und Technikhändler. Suchen Sie nach einem beliebigen Schlüsselwort – Laptop, rtx 4070, SSD – und erhalten Sie die Produktlisten mit Titel, Marke, Modell, aktuellem Preis, Originalpreis, Bild, Bewertung, Anzahl der Bewertungen, Lagerbestand, Verkäufer und der Newegg-Produkt-URL. Die Preise sind live in USD. Ideal für Shopping, Preisvergleiche, Angebotsverfolgung und E-Commerce-Dashboards.

api.oanor.com/newegg-api

 RTD Pt100 Sensor API — oanor API marketplace

RTD Pt100 Sensor API

RTD (Widerstands-Temperatur-Detektor) Sensor-Mathematik als API, lokal und deterministisch mit der IEC 60751 Callendar-Van Dusen Gleichung berechnet – die Widerstands-, Temperatur- und Toleranzzahlen, die ein Instrumentierungs- oder Steuerungsingenieur von einem Pt100 oder Pt1000 abliest. Der Widerstands-Endpunkt gibt den Sensorwiderstand aus der Temperatur: über 0 °C, R = R₀·(1 + A·T + B·T²) mit A = 3,9083×10⁻³ und B = −5,775×10⁻⁷; unter 0 °C fügt ein dritter Term C·(T−100)·T³ hinzu – ein Standard-Pt100 (100 Ω bei 0 °C) zeigt 138,51 Ω bei 100 °C und 80,31 Ω bei −50 °C, und ein Pt1000 ist das Zehnfache. Der Temperatur-Endpunkt kehrt dies um, um einen gemessenen Widerstand wieder in Temperatur umzuwandeln – analytisch über 0 °C, iterativ darunter – genau das, was ein Messumformer mit der Brückenablesung macht, und eine Erinnerung daran, dass eine 3- oder 4-Leiter-Verbindung den Leitungswiderstand aufhebt, sodass er nicht als zusätzliche Grad gelesen wird. Der Toleranz-Endpunkt gibt die IEC 60751 Genauigkeitsband in °C und Ω nach Klasse an – AA ±(0,10 + 0,0017·|T|), A ±(0,15 + 0,002·|T|), B ±(0,30 + 0,005·|T|), C ±(0,60 + 0,010·|T|) – der Fehler wächst mit der Entfernung von 0 °C. Alles wird lokal und deterministisch berechnet, daher ist es sofort und privat. Ideal für Instrumentierungs- und Steuerungssoftware, Datenlogger- und Messumformer-Firmware, Kalibrierungs- und industrielle IoT-Tools. Reine lokale Berechnung – kein Key, kein Drittanbieter-Dienst, sofort. 3 Compute-Endpunkte. Für NTC-Thermistoren verwenden Sie eine Thermistor-API; für Thermoelemente eine Thermoelement-API.

api.oanor.com/rtd-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Rectifier Ripple API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Rectifier Ripple API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Rectifier Ripple API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Rectifier Ripple API?
Rectifier Ripple API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €9.00 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Rectifier Ripple API è conforme al GDPR?
Tutte le richieste a Rectifier Ripple API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/rectifier-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/rectifier-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/rectifier-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/rectifier-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.