oanor
Sign up free
Marketplace Pricing Features Sign in

API · /chain-api

Roller Chain Drive API

healthy 3,801 Subscribers

Roller-chain power-transmission maths as an API, computed locally and deterministically. The ratio endpoint computes a chain drive's speed ratio (driven ÷ driver teeth), the output rpm and torque multiplier, the chain (line) velocity v = N·p·rpm/60 and the pitch diameter of each sprocket, PD = p/sin(π/N), from the driver and driven tooth counts, the input speed and the chain pitch. The length endpoint computes the chain length in pitches and then rounds it up to an even number of links — links must come in pairs — using L = 2C/p + (N1+N2)/2 + ((N2−N1)/2π)²·p/C from the tooth counts, the centre distance and the pitch. The center-distance endpoint inverts that relation to give the exact centre distance for a chosen even link count, C = (p/8)·[(2L−N1−N2) + √((2L−N1−N2)² − 8·((N2−N1)/2π)²)]. Tooth counts are integers, pitch and centre distance in metres (the default pitch 0.0127 m is ANSI 40, ½ inch) and speeds in rpm. Everything is computed locally and deterministically, so it is instant and private. Ideal for mechanical, machine-design, conveyor, motorcycle and industrial-equipment app developers, sprocket-sizing and chain-selection tools, and engineering education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is industrial roller-chain drives; for bicycle gearing use a bike-gear API and for belt or gear ratios a gear-ratio API.

#roller-chain #sprocket #mechanical #power-transmission #drive #developer-tools
api.oanor.com/chain-api
Get an API key Try in playground → Contact provider

Machine-readable spec so AI agents can integrate this API.

/api/chain-api/openapi.json
/api/chain-api/llms.txt

Discovery: GET /api/index.json lists every API.

Roller Chain Drive API — live data on the oanor API marketplace

API health

healthy
Uptime
100.00%
Server probes · 24h
Avg latency
81 ms
Server probes · 24h
Subscribers
3,801
active
Total calls
76
last 7 days
status Full status page → · 12 probes/24h

Pricing

Pick a tier — billed monthly, cancel anytime.

Free

Free

  • 2,620 calls / month
  • 2 requests / second
  • Hard cap (429 above quota, no overage)
  • 2,620 calls/month
  • 2 req/sec
  • Ratio + length + centre distance
  • No credit card
Sign in to subscribe

Starter

€9.00 /month

  • 38,800 calls / month
  • 6 requests / second
  • Hard cap (429 above quota, no overage)
  • 38,800 calls/month
  • 6 req/sec
  • Chain velocity, pitch diameters
  • Email support
Sign in to subscribe

Pro

€23.00 /month

  • 251,000 calls / month
  • 15 requests / second
  • Hard cap (429 above quota, no overage)
  • 251,000 calls/month
  • 15 req/sec
  • Machine-design & conveyor pipelines
  • Priority support
Sign in to subscribe

Mega

€71.00 /month

  • 1,670,000 calls / month
  • 40 requests / second
  • Hard cap (429 above quota, no overage)
  • 1,670,000 calls/month
  • 40 req/sec
  • Platform scale
  • Dedicated SLA
Sign in to subscribe

Built by

P
PremiumApi

Related APIs

Other APIs with overlapping tags.

Roller Chain Drive API — oanor API marketplace

Roller Chain Drive API

Roller-chain drive maths as an API, computed locally and deterministically — the chain-length, sprocket and speed numbers a machine designer or millwright lays out a drive with. The chain-length endpoint gives the chain in pitches from the two sprocket tooth counts, the chain pitch and the centre distance: L = 2·C + (N1+N2)/2 + ((N2−N1)/2π)² ÷ C (C in pitches), rounded UP to an even number so the chain closes without an offset link — a 17- and 34-tooth pair at 15-inch centres on #40 (half-inch) chain comes to 86 pitches, 43 inches. The sprocket endpoint gives the pitch diameter, pitch ÷ sin(180°/teeth), and the outside diameter — a 17-tooth #40 sprocket has a 2.72-inch pitch circle. The speed endpoint gives the chain's linear speed, pitch × teeth × rpm ÷ 12, so a 17-tooth #40 sprocket at 100 rpm runs the chain at about 71 ft/min. Everything is computed locally and deterministically, so it is instant and private. Ideal for machine-design and drivetrain apps, conveyor and equipment-build tools, maker and CAD calculators, and engineering aids. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 compute endpoints. For gear ratios use a gear-ratio API; for belts use a pulley API.

api.oanor.com/chaindrive-api

 Riveted Joint API — oanor API marketplace

Riveted Joint API

Riveted-joint strength maths as an API, computed locally and deterministically — the shear, bearing and rivet-count numbers a structural, sheet-metal or aircraft fitter checks a riveted connection by. The shear-capacity endpoint gives the load a rivet group carries across its shanks = the rivet area (π/4·d²) × the shear strength × the number of rivets × the shear planes — a rivet in single shear is cut on one plane, in double shear (the centre plate of a butt joint with cover plates) on two, so it carries twice. The bearing-capacity endpoint gives the load the rivets can press against the sides of their holes before the plate crushes = the projected contact area (diameter × plate thickness) × the bearing strength × the number of rivets; thin plates fail in bearing long before the rivet shears, which is exactly why both must be checked — the joint strength is the lesser of the two. The rivets-required endpoint inverts it: the rivets a design load needs = the load ÷ the allowable load per rivet (area × allowable shear × planes), rounded up to a whole rivet, using the working shear (strength ÷ safety factor) not the raw value. Everything is computed locally and deterministically, so it is instant and private. Ideal for structural and sheet-metal estimating, mechanical-design and fastener tools, and engineering calculators. Pure local computation — no key, no third-party service, instant. Shank-shear and bearing only — also confirm edge tear-out and minimum pitch. 3 compute endpoints. For bolt preload and torque use a bolt-torque API; for thread geometry a thread API; for welded joints a welding API.

api.oanor.com/rivet-api

 Winch Drum API — oanor API marketplace

Winch Drum API

Winch and cable-drum maths as an API, computed locally and deterministically — the rope-capacity, line-pull and rope-out numbers a winch operator, rigger or recovery driver works a drum with. The capacity endpoint gives the rope a drum holds by exact layer geometry: the sum over every full layer of the turns per layer × π × that layer's mean wrap diameter, where turns per layer = drum width ÷ rope diameter and the number of layers = the flange-to-barrel depth ÷ rope diameter — a 10-inch barrel, 20-inch flange, 12-inch-wide drum on half-inch rope holds about 940 ft over 10 layers. The layer-pull endpoint shows why pull falls as the drum fills: the rated pull is for the bare-drum first layer, and as rope piles on, the growing lever arm cuts the line pull and raises the line speed in the same ratio — pull × (first-layer diameter ÷ this layer's diameter) — so the top layer of a deep drum can pull barely half the bottom-layer rating, which is why you spool off to bare drum for a hard pull or add a snatch block. The length-at-layer endpoint gives the rope wound after a number of full layers, for marking the rope or knowing how much line is out. Everything is computed locally and deterministically, so it is instant and private. Ideal for winch- and hoist-sizing tools, recovery and off-road apps, marine and industrial-rigging utilities, and engineering calculators. Pure local computation — no key, no third-party service, instant. Geometric estimate — allow for nesting and freeboard. 3 compute endpoints. For capstan friction use a capstan API; for block-and-tackle a pulley API.

api.oanor.com/winch-api

 Elevator Traction API — oanor API marketplace

Elevator Traction API

Traction-elevator engineering maths as an API, computed locally and deterministically — the counterweight, hoist-motor and rope-traction numbers a lift engineer or building-services designer sizes a passenger elevator with. The counterweight endpoint gives the balancing mass = the empty car plus a fraction of the rated load (the overbalance, typically 40–50 %, 45 % common), so a 1,000 kg car rated for 1,000 kg uses a 1,450 kg counterweight — the car and weight balance near half load and the machine is sized for the worst-case imbalance, not the full load. The motor-power endpoint uses that: because the counterweight cancels most of the car, the motor only lifts the out-of-balance load = rated load × (1 − overbalance), so power = that × g × speed ÷ efficiency (~65–75 % geared) — a 1,000 kg lift at 1.5 m/s needs only about 11–12 kW, half what a counterweight-less hoist would draw. The traction-ratio endpoint checks the friction grip: a traction elevator moves the ropes by friction over the sheave, so the available traction (e^(μθ), the capstan equation) must beat the T1/T2 tension ratio at both worst cases — a full car at the bottom and an empty car at the top — and it returns the governing ratio. Everything is computed locally and deterministically, so it is instant and private. Ideal for lift-design and building-services tools, vertical-transport and MEP utilities, and engineering calculators. Pure local computation — no key, no third-party service, instant. Sizing estimates — follow the lift code and maker data. 3 compute endpoints. For block-and-tackle use a pulley API; for capstan friction a capstan API.

api.oanor.com/elevator-api

Frequently asked questions

Quick answers about pricing, quotas, and integration.

How do I get an API key for Roller Chain Drive API?
Sign up for free at oanor.com, generate an API key from the developer dashboard, and call Roller Chain Drive API with the x-oanor-key header. No credit card needed for the free tier.
What's the rate limit for Roller Chain Drive API?
Free tier allows 1 request per second. Paid plans scale up to 50 requests per second on the Mega tier. Hard limits return HTTP 429 above the quota — no surprise overage charges.
How much does Roller Chain Drive API cost?
Roller Chain Drive API has a free tier with 100 calls / month. Paid plans start at €9.00 / month with higher quotas and faster rate limits.
Can I cancel my subscription anytime?
Yes. Plans are billed monthly and you can cancel anytime from your billing dashboard. No long-term contracts and no cancellation fee.
Is Roller Chain Drive API GDPR-compliant?
All requests to Roller Chain Drive API go through our EU-based gateway. Your upstream API key never leaves our server and no personal data is shared with the upstream provider beyond the request you send.

Pick an endpoint from the list on the left to see its details and try it.

Code snippets

Sign up to get an API key, then call any path under your slug.

curl https://api.oanor.com/chain-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/chain-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/chain-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/chain-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Ratings

Sign in to rate.

No reviews yet.

Discussion

Ask questions, share usage tips, get answers from the provider and other developers. Public — anyone can read.

Sign in to start a thread or reply.

Sign in

New thread

/ 4000

📌 Pinned 🔒 Locked

·

· ·

/ 4000

🔒 This thread is locked — no new replies.

  • No threads yet — start the discussion.

Support

Private 1:1 support with the provider — billing questions, integration issues, account problems. Only you and the provider team can see these threads.

Sign in to open a support ticket.

Sign in

Open new ticket

Describe what you need help with. The provider team gets an email and replies on the ticket page.

  • No tickets yet for this API.

Subscription active — calls can start immediately.

Send your first request —

Subscription active — copy a snippet and fire off your first call.