oanor
Sign up free
Marketplace Pricing Features Sign in

API · /transistor-api

BJT Transistor API

healthy 4,994 Subscribers

Bipolar-junction-transistor (BJT) circuit maths as an API, computed locally and deterministically. The currents endpoint relates the three terminal currents through the DC current gain β (hFE): the collector current Ic = β·Ib, the emitter current Ie = (β+1)·Ib and the common-base gain α = β/(β+1) ≈ 1, from β and any one current. The bias endpoint analyses the operating point of the classic voltage-divider bias network — from the supply voltage, the two divider resistors, the collector and emitter resistors, β and the base-emitter drop it computes the Thévenin equivalent (Vth = Vcc·R2/(R1+R2), Rth = R1‖R2), the base current Ib = (Vth − Vbe)/(Rth + (β+1)·Re), the collector and emitter currents, the collector-emitter voltage Vce and the node voltages, and classifies the operating region as cutoff, active or saturation. The power endpoint computes the transistor's power dissipation, Pd ≈ Vce·Ic (plus Vbe·Ib), to check it against the rated maximum. Currents are in amperes, resistances in ohms and voltages in volts, with Vbe defaulting to 0.7 V for silicon. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, amplifier-design, embedded and hobbyist app developers, biasing and operating-point tools, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is BJT biasing; for op-amp circuits use an op-amp API and for an LED series resistor an LED-resistor API.

#transistor #bjt #biasing #electronics #amplifier #developer-tools
api.oanor.com/transistor-api
Get an API key Try in playground → Contact provider

Machine-readable spec so AI agents can integrate this API.

/api/transistor-api/openapi.json
/api/transistor-api/llms.txt

Discovery: GET /api/index.json lists every API.

BJT Transistor API — live data on the oanor API marketplace

API health

healthy
Uptime
100.00%
Server probes · 24h
Avg latency
71 ms
Server probes · 24h
Subscribers
4,994
active
Total calls
76
last 7 days
status Full status page → · 12 probes/24h

Pricing

Pick a tier — billed monthly, cancel anytime.

Free

Free

  • 2,580 calls / month
  • 2 requests / second
  • Hard cap (429 above quota, no overage)
  • 2,580 calls/month
  • 2 req/sec
  • Currents + bias + power
  • No credit card
Sign in to subscribe

Starter

€8.00 /month

  • 39,200 calls / month
  • 6 requests / second
  • Hard cap (429 above quota, no overage)
  • 39,200 calls/month
  • 6 req/sec
  • Operating point, region, α
  • Email support
Sign in to subscribe

Pro

€21.00 /month

  • 253,000 calls / month
  • 15 requests / second
  • Hard cap (429 above quota, no overage)
  • 253,000 calls/month
  • 15 req/sec
  • Amplifier & embedded pipelines
  • Priority support
Sign in to subscribe

Mega

€65.00 /month

  • 1,640,000 calls / month
  • 40 requests / second
  • Hard cap (429 above quota, no overage)
  • 1,640,000 calls/month
  • 40 req/sec
  • Platform scale
  • Dedicated SLA
Sign in to subscribe

Built by

P
PremiumApi

Related APIs

Other APIs with overlapping tags.

Newegg API — oanor API marketplace

Newegg API

Live product search from Newegg.com, the major electronics & tech retailer. Search any keyword — laptop, rtx 4070, ssd — and get the product listings with title, brand, model, current price, original price, image, rating, review count, in-stock status, seller and the Newegg product URL. Prices are live USD. Ideal for shopping, price-comparison, deal-tracking and e-commerce dashboards.

api.oanor.com/newegg-api

 RTD Pt100 Sensor API — oanor API marketplace

RTD Pt100 Sensor API

RTD (resistance-temperature-detector) sensor maths as an API, computed locally and deterministically with the IEC 60751 Callendar–Van Dusen equation — the resistance, temperature and tolerance numbers an instrumentation or controls engineer reads a Pt100 or Pt1000 with. The resistance endpoint gives the sensor resistance from temperature: above 0 °C, R = R₀·(1 + A·T + B·T²) with A = 3.9083×10⁻³ and B = −5.775×10⁻⁷; below 0 °C a third term adds C·(T−100)·T³ — a standard Pt100 (100 Ω at 0 °C) reads 138.51 Ω at 100 °C and 80.31 Ω at −50 °C, and a Pt1000 is ten times that. The temperature endpoint inverts it to turn a measured resistance back into temperature — analytically above 0 °C, iteratively below — exactly what a transmitter does with the bridge reading, and a reminder that a 3- or 4-wire connection cancels the lead-wire resistance so it does not read as extra degrees. The tolerance endpoint gives the IEC 60751 accuracy band in both °C and Ω by class — AA ±(0.10 + 0.0017·|T|), A ±(0.15 + 0.002·|T|), B ±(0.30 + 0.005·|T|), C ±(0.60 + 0.010·|T|) — the error growing with distance from 0 °C. Everything is computed locally and deterministically, so it is instant and private. Ideal for instrumentation and controls software, data-logger and transmitter firmware, calibration and industrial-IoT tools. Pure local computation — no key, no third-party service, instant. 3 compute endpoints. For NTC thermistors use a thermistor API; for thermocouples a thermocouple API.

api.oanor.com/rtd-api

 Voltage Divider API — oanor API marketplace

Voltage Divider API

Resistive voltage-divider circuit design as an API, computed locally and deterministically. The divide endpoint takes an input voltage and two resistors and returns the output voltage Vout = Vin·R2/(R1+R2), the current I = Vin/(R1+R2) that flows through the chain, and the power dissipated in each resistor and in total — a 12 V source with R1 = 1 kΩ and R2 = 2 kΩ gives 8 V at 4 mA. The loaded endpoint adds a load resistor across R2, computes the parallel combination R2′ = R2·RL/(R2+RL) and the loaded output Vout = Vin·R2′/(R1+R2′), and reports the droop in volts and percent against the unloaded value, the classic mistake when a divider feeds a real load. The resistor endpoint sizes the missing resistor for a target output — R2 = R1·Vout/(Vin−Vout) or R1 = R2·(Vin−Vout)/Vout — so you can pick parts for a reference or sensor-bias point. All quantities are volts, ohms, amps and watts. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, embedded, hardware, sensor-interfacing and EE-education app developers, reference-voltage and bias-network tools, and maker software. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is the resistive divider; for a single Ohm’s-law relationship use an Ohm’s-law API and for RC/RL filters an RC-filter API.

api.oanor.com/voltagedivider-api

 RC Filter API — oanor API marketplace

RC Filter API

First-order RC and RL passive-filter design as an API, computed locally and deterministically. The lowpass and highpass endpoints take a resistor and capacitor (RC) or a resistor and inductor (RL) and return the −3 dB cutoff frequency (fc = 1/(2πRC) for RC, R/(2πL) for RL), the time constant (τ = RC or L/R) and the angular cutoff; pass a frequency as well and they add the magnitude response as a linear gain and in decibels and the phase shift in degrees — a 1 kΩ / 1 µF low-pass has fc ≈ 159.15 Hz, and right at the cutoff the gain is −3.01 dB with −45° phase for a low-pass or +45° for a high-pass. The component endpoint solves the missing one of fc, R and C from the other two (fc = 1/(2πRC)), so you can size a resistor or capacitor for a target cutoff. All quantities are SI: ohms, farads, henries and hertz. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, audio, embedded, signal-processing and EE-education app developers, filter-design and circuit-sizing tools, and maker software. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is first-order single-pole filter design; for full RLC impedance and resonance use an impedance API and for stored capacitor energy a capacitor API.

api.oanor.com/rcfilter-api

Frequently asked questions

Quick answers about pricing, quotas, and integration.

How do I get an API key for BJT Transistor API?
Sign up for free at oanor.com, generate an API key from the developer dashboard, and call BJT Transistor API with the x-oanor-key header. No credit card needed for the free tier.
What's the rate limit for BJT Transistor API?
Free tier allows 1 request per second. Paid plans scale up to 50 requests per second on the Mega tier. Hard limits return HTTP 429 above the quota — no surprise overage charges.
How much does BJT Transistor API cost?
BJT Transistor API has a free tier with 100 calls / month. Paid plans start at €8.00 / month with higher quotas and faster rate limits.
Can I cancel my subscription anytime?
Yes. Plans are billed monthly and you can cancel anytime from your billing dashboard. No long-term contracts and no cancellation fee.
Is BJT Transistor API GDPR-compliant?
All requests to BJT Transistor API go through our EU-based gateway. Your upstream API key never leaves our server and no personal data is shared with the upstream provider beyond the request you send.

Pick an endpoint from the list on the left to see its details and try it.

Code snippets

Sign up to get an API key, then call any path under your slug.

curl https://api.oanor.com/transistor-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/transistor-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/transistor-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/transistor-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Ratings

Sign in to rate.

No reviews yet.

Discussion

Ask questions, share usage tips, get answers from the provider and other developers. Public — anyone can read.

Sign in to start a thread or reply.

Sign in

New thread

/ 4000

📌 Pinned 🔒 Locked

·

· ·

/ 4000

🔒 This thread is locked — no new replies.

  • No threads yet — start the discussion.

Support

Private 1:1 support with the provider — billing questions, integration issues, account problems. Only you and the provider team can see these threads.

Sign in to open a support ticket.

Sign in

Open new ticket

Describe what you need help with. The provider team gets an email and replies on the ticket page.

  • No tickets yet for this API.

Subscription active — calls can start immediately.

Send your first request —

Subscription active — copy a snippet and fire off your first call.