API · /pressurevessel-api

Pressure Vessel API

healthy 3,466 Subscribers

Thin-walled pressure-vessel engineering maths as an API, computed locally and deterministically. The thin-wall endpoint computes the wall stresses in a cylindrical or spherical vessel under internal pressure: for a cylinder the hoop (circumferential) stress σ_h = p·r/t and the longitudinal stress σ_l = p·r/(2t), which is half the hoop — so cylinders tend to split along their length — together with the von Mises equivalent stress, and for a sphere the single biaxial stress σ = p·r/(2t); it also reports the radius-to-thickness ratio and whether the thin-wall assumption (r/t ≳ 10) holds. The thickness endpoint computes the wall thickness required to keep the hoop stress within an allowable value, t = p·r/(σ_allow·E), with a weld-joint efficiency factor. The burst endpoint computes the theoretical burst pressure of a pipe from Barlow's formula, p = 2·S·t/OD, using the ultimate tensile strength. Pressures and stresses are in pascals (megapascals also returned) and dimensions in metres. Everything is computed locally and deterministically, so it is instant and private. Ideal for mechanical, chemical-plant, piping, boiler and tank-design app developers, ASME-style sizing and safety tools, and engineering education; for code work consult the applicable standards. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is thin-walled vessel stress; for general stress transformation use a Mohr-circle API and for fatigue a fatigue API.

#pressure-vessel #hoop-stress #mechanical #piping #stress #developer-tools

api.oanor.com/pressurevessel-api

Get an API key Try in playground → Contact provider

Machine-readable spec so AI agents can integrate this API.

/api/pressurevessel-api/openapi.json

/api/pressurevessel-api/llms.txt

Discovery: GET /api/index.json lists every API.

Pressure Vessel API — live data on the oanor API marketplace

API health

healthy

Uptime: 100.00%; Server probes · 24h
Avg latency: 74 ms; Server probes · 24h
Subscribers: 3,466; active
Total calls: 80; last 7 days

Full status page → · 16 probes/24h

Pricing

Pick a tier — billed monthly, cancel anytime.

Free

2,350 calls / month
2 requests / second
Hard cap (429 above quota, no overage)
2,350 calls/month
2 req/sec
Thin-wall + thickness + burst
No credit card

Starter

€9.00 /month

37,500 calls / month
6 requests / second
Hard cap (429 above quota, no overage)
37,500 calls/month
6 req/sec
Hoop/longitudinal/von Mises, sphere
Email support

Pro

€26.00 /month

247,000 calls / month
15 requests / second
Hard cap (429 above quota, no overage)
247,000 calls/month
15 req/sec
Piping & boiler-design pipelines
Priority support

Mega

€79.00 /month

1,660,000 calls / month
40 requests / second
Hard cap (429 above quota, no overage)
1,660,000 calls/month
40 req/sec
Platform scale
Dedicated SLA

Built by

PremiumApi

Related APIs

Other APIs with overlapping tags.

Riveted Joint API

Riveted-joint strength maths as an API, computed locally and deterministically — the shear, bearing and rivet-count numbers a structural, sheet-metal or aircraft fitter checks a riveted connection by. The shear-capacity endpoint gives the load a rivet group carries across its shanks = the rivet area (π/4·d²) × the shear strength × the number of rivets × the shear planes — a rivet in single shear is cut on one plane, in double shear (the centre plate of a butt joint with cover plates) on two, so it carries twice. The bearing-capacity endpoint gives the load the rivets can press against the sides of their holes before the plate crushes = the projected contact area (diameter × plate thickness) × the bearing strength × the number of rivets; thin plates fail in bearing long before the rivet shears, which is exactly why both must be checked — the joint strength is the lesser of the two. The rivets-required endpoint inverts it: the rivets a design load needs = the load ÷ the allowable load per rivet (area × allowable shear × planes), rounded up to a whole rivet, using the working shear (strength ÷ safety factor) not the raw value. Everything is computed locally and deterministically, so it is instant and private. Ideal for structural and sheet-metal estimating, mechanical-design and fastener tools, and engineering calculators. Pure local computation — no key, no third-party service, instant. Shank-shear and bearing only — also confirm edge tear-out and minimum pitch. 3 compute endpoints. For bolt preload and torque use a bolt-torque API; for thread geometry a thread API; for welded joints a welding API.

api.oanor.com/rivet-api

Winch Drum API

Winch and cable-drum maths as an API, computed locally and deterministically — the rope-capacity, line-pull and rope-out numbers a winch operator, rigger or recovery driver works a drum with. The capacity endpoint gives the rope a drum holds by exact layer geometry: the sum over every full layer of the turns per layer × π × that layer's mean wrap diameter, where turns per layer = drum width ÷ rope diameter and the number of layers = the flange-to-barrel depth ÷ rope diameter — a 10-inch barrel, 20-inch flange, 12-inch-wide drum on half-inch rope holds about 940 ft over 10 layers. The layer-pull endpoint shows why pull falls as the drum fills: the rated pull is for the bare-drum first layer, and as rope piles on, the growing lever arm cuts the line pull and raises the line speed in the same ratio — pull × (first-layer diameter ÷ this layer's diameter) — so the top layer of a deep drum can pull barely half the bottom-layer rating, which is why you spool off to bare drum for a hard pull or add a snatch block. The length-at-layer endpoint gives the rope wound after a number of full layers, for marking the rope or knowing how much line is out. Everything is computed locally and deterministically, so it is instant and private. Ideal for winch- and hoist-sizing tools, recovery and off-road apps, marine and industrial-rigging utilities, and engineering calculators. Pure local computation — no key, no third-party service, instant. Geometric estimate — allow for nesting and freeboard. 3 compute endpoints. For capstan friction use a capstan API; for block-and-tackle a pulley API.

api.oanor.com/winch-api

Elevator Traction API

Traction-elevator engineering maths as an API, computed locally and deterministically — the counterweight, hoist-motor and rope-traction numbers a lift engineer or building-services designer sizes a passenger elevator with. The counterweight endpoint gives the balancing mass = the empty car plus a fraction of the rated load (the overbalance, typically 40–50 %, 45 % common), so a 1,000 kg car rated for 1,000 kg uses a 1,450 kg counterweight — the car and weight balance near half load and the machine is sized for the worst-case imbalance, not the full load. The motor-power endpoint uses that: because the counterweight cancels most of the car, the motor only lifts the out-of-balance load = rated load × (1 − overbalance), so power = that × g × speed ÷ efficiency (~65–75 % geared) — a 1,000 kg lift at 1.5 m/s needs only about 11–12 kW, half what a counterweight-less hoist would draw. The traction-ratio endpoint checks the friction grip: a traction elevator moves the ropes by friction over the sheave, so the available traction (e^(μθ), the capstan equation) must beat the T1/T2 tension ratio at both worst cases — a full car at the bottom and an empty car at the top — and it returns the governing ratio. Everything is computed locally and deterministically, so it is instant and private. Ideal for lift-design and building-services tools, vertical-transport and MEP utilities, and engineering calculators. Pure local computation — no key, no third-party service, instant. Sizing estimates — follow the lift code and maker data. 3 compute endpoints. For block-and-tackle use a pulley API; for capstan friction a capstan API.

api.oanor.com/elevator-api

HVAC Air-Side Load API

HVAC air-side heat maths as an API, computed locally and deterministically with the classic standard-air factors — the sensible, latent and airflow numbers a mechanical engineer or HVAC technician sizes ducts and equipment with. The sensible endpoint gives the sensible heat an airflow carries to change temperature: Qs = 1.08 × CFM × ΔT (dry-bulb difference), where the 1.08 bundles standard-air density and specific heat — 2,000 CFM across a 20 °F difference is 43,200 BTU/hr, 3.6 tons — with the result in BTU/hr, tons and kW. The latent endpoint gives the latent (moisture) heat: Ql = 0.68 × CFM × ΔW, where ΔW is the humidity-ratio difference in grains of water per pound of dry air, the dehumidification part of a cooling load that runs high in humid climates and from people and cooking, and why air conditioners are sized on total, not just temperature. The airflow endpoint inverts the sensible relation: CFM = sensible load ÷ (1.08 × ΔT), the supply air needed at a chosen supply-to-room temperature difference (comfort cooling runs ~18–22 °F below room), the number that sets fan and duct size — sanity-checked against ~400 CFM per ton. Everything is computed locally and deterministically, so it is instant and private. Ideal for HVAC-design and load-calc tools, mechanical-estimating and commissioning utilities, and building-engineering apps. Pure local computation — no key, no third-party service, instant. Standard-air factors — adjust for altitude. 3 compute endpoints. For room rule-of-thumb sizing use an HVAC API; for moist-air properties a psychrometric API; for duct sizing a ductwork API.

api.oanor.com/hvacload-api

Frequently asked questions

Quick answers about pricing, quotas, and integration.

How do I get an API key for Pressure Vessel API?

Sign up for free at oanor.com, generate an API key from the developer dashboard, and call Pressure Vessel API with the x-oanor-key header. No credit card needed for the free tier.

What's the rate limit for Pressure Vessel API?

Free tier allows 1 request per second. Paid plans scale up to 50 requests per second on the Mega tier. Hard limits return HTTP 429 above the quota — no surprise overage charges.

How much does Pressure Vessel API cost?

Pressure Vessel API has a free tier with 100 calls / month. Paid plans start at €9.00 / month with higher quotas and faster rate limits.

Can I cancel my subscription anytime?

Yes. Plans are billed monthly and you can cancel anytime from your billing dashboard. No long-term contracts and no cancellation fee.

Is Pressure Vessel API GDPR-compliant?

All requests to Pressure Vessel API go through our EU-based gateway. Your upstream API key never leaves our server and no personal data is shared with the upstream provider beyond the request you send.

PressureVessel 3

Meta 1

Pick an endpoint from the list on the left to see its details and try it.

GET /v1/burst

Barlow burst pressure

Playground

Parameters

Custom headers

Language: Client:

GET /v1/thickness

Required thickness

Playground

Parameters

Custom headers

Language: Client:

GET /v1/thin-wall

Thin-wall stress

Playground

Parameters

Custom headers

Language: Client:

GET /v1/meta

Spec

Playground

Custom headers

Language: Client:

Code snippets

curl https://api.oanor.com/pressurevessel-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."

const res = await fetch("https://api.oanor.com/pressurevessel-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();

$ch = curl_init("https://api.oanor.com/pressurevessel-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);

import requests
r = requests.get(
    "https://api.oanor.com/pressurevessel-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Ratings

No reviews yet.

Discussion

Ask questions, share usage tips, get answers from the provider and other developers. Public — anyone can read.

New thread

📌 Pinned 🔒 Locked

· ·

🔒 This thread is locked — no new replies.

No threads yet — start the discussion.

Support

Private 1:1 support with the provider — billing questions, integration issues, account problems. Only you and the provider team can see these threads.

Open new ticket

Describe what you need help with. The provider team gets an email and replies on the ticket page.

No tickets yet for this API.

Subscription active — calls can start immediately.

Send your first request —

Subscription active — copy a snippet and fire off your first call.

Pick a key

Plaintext is shown once at creation — use the prefix as a reminder.

Pressure Vessel API

API health

Pricing

Built by

Related APIs

Riveted Joint API

Winch Drum API

Elevator Traction API

HVAC Air-Side Load API

Frequently asked questions

Parameters

Parameters

Parameters

Code snippets

Ratings

Discussion

New thread

📌 🔒

Support

Open new ticket

Your cookie choices