oanor
Sign up free
Marketplace Pricing Features Sign in

API · /impedance-api

AC Impedance API

healthy 4,703 Subscribers

AC complex-impedance maths as an API, computed locally and deterministically. The series endpoint computes the impedance of a series R-L-C circuit at a given frequency — the inductive reactance X_L = 2πf·L, the capacitive reactance X_C = 1/(2πf·C), the complex impedance Z = R + j(X_L − X_C), its magnitude |Z| = √(R²+X²) and phase angle φ = atan(X/R) — and classifies the circuit as inductive (current lags), capacitive (current leads) or resistive. The parallel endpoint computes a parallel R-L-C impedance through its admittance Y = 1/R + j(ωC − 1/ωL) and Z = 1/Y, with magnitude and phase. The ac-ohm endpoint applies Ohm's law for AC, I = V / |Z|, to give the RMS current and apparent power from an RMS voltage and an impedance specified either as resistance and reactance or as a magnitude, and the real power when the phase is known. Resistance and reactance are in ohms, inductance in henries, capacitance in farads, frequency in hertz and voltage RMS in volts; phase is in degrees. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, audio, RF-filter, power-supply and motor-control app developers, AC-circuit and phasor tools, and electrical-engineering education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is AC complex impedance; for the resonant frequency and reactance alone use a resonance API and for power-factor correction a power-factor API.

#impedance #ac-circuit #rlc #reactance #electronics #developer-tools
api.oanor.com/impedance-api
Get an API key Try in playground → Contact provider

Machine-readable spec so AI agents can integrate this API.

/api/impedance-api/openapi.json
/api/impedance-api/llms.txt

Discovery: GET /api/index.json lists every API.

AC Impedance API — live data on the oanor API marketplace

API health

healthy
Uptime
100.00%
Server probes · 24h
Avg latency
76 ms
Server probes · 24h
Subscribers
4,703
active
Total calls
80
last 7 days
status Full status page → · 16 probes/24h

Pricing

Pick a tier — billed monthly, cancel anytime.

Free

Free

  • 2,500 calls / month
  • 2 requests / second
  • Hard cap (429 above quota, no overage)
  • 2,500 calls/month
  • 2 req/sec
  • Series + parallel + AC Ohm
  • No credit card
Sign in to subscribe

Starter

€8.00 /month

  • 44,000 calls / month
  • 6 requests / second
  • Hard cap (429 above quota, no overage)
  • 44,000 calls/month
  • 6 req/sec
  • Complex Z, magnitude & phase
  • Email support
Sign in to subscribe

Pro

€21.00 /month

  • 260,000 calls / month
  • 15 requests / second
  • Hard cap (429 above quota, no overage)
  • 260,000 calls/month
  • 15 req/sec
  • Filter & power-supply pipelines
  • Priority support
Sign in to subscribe

Mega

€68.00 /month

  • 1,550,000 calls / month
  • 40 requests / second
  • Hard cap (429 above quota, no overage)
  • 1,550,000 calls/month
  • 40 req/sec
  • Platform scale
  • Dedicated SLA
Sign in to subscribe

Built by

P
PremiumApi

Related APIs

Other APIs with overlapping tags.

VSWR & Impedance Match API — oanor API marketplace

VSWR & Impedance Match API

VSWR and RF impedance-matching maths as an API, computed locally and deterministically. The vswr endpoint computes the voltage standing-wave ratio and its companion figures — the reflection coefficient Γ = (ZL − Z0)/(ZL + Z0) = √(Pr/Pf), the VSWR = (1+|Γ|)/(1−|Γ|), the return loss −20·log₁₀|Γ| dB, the mismatch loss and the percentage of power reflected and transmitted — from a reflection coefficient, a load and source impedance (Z0 default 50 Ω), or the forward and reflected power. The fromvswr endpoint goes the other way, deriving Γ, return loss and the power split from a VSWR figure. The power endpoint computes the reflected and transmitted power from a forward power and a VSWR or reflection coefficient. Everything is computed locally and deterministically, so it is instant and private. Ideal for RF, antenna, amateur-radio and wireless app developers, antenna-tuning and feedline tools, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is RF impedance match; for antenna gain and aperture use an antenna API.

api.oanor.com/vswr-api

 AC Resonance & Reactance API — oanor API marketplace

AC Resonance & Reactance API

AC reactance and LC/RC tuning maths as an API, computed locally and deterministically. The reactance endpoint computes the capacitive reactance Xc = 1/(2πfC) and the inductive reactance Xl = 2πfL at a given frequency, and — when both a capacitor and an inductor are supplied — the net series reactance X = Xl − Xc, whether the circuit looks inductive, capacitive or resonant, and the impedance magnitude. The resonant endpoint computes the LC resonant frequency f₀ = 1/(2π√(LC)), or, given a target frequency and one component, solves the other component you need to tune to it. The cutoff endpoint computes the RC or RL filter cutoff frequency — fc = 1/(2πRC) for RC, fc = R/(2πL) for RL — and the time constant. Frequencies are in hertz; capacitance, inductance and resistance accept SI base units with handy µF/nF/pF and mH/µH inputs. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, RF, audio-filter and embedded app developers, tuning and filter-design tools, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is AC reactance & LC/RC tuning; for LED series-resistor sizing use an LED-resistor API and for VSWR and impedance match use a VSWR API.

api.oanor.com/resonance-api

 Ohm's Law & Circuits API — oanor API marketplace

Ohm's Law & Circuits API

Electronics circuit maths as an API. The ohms-law endpoint takes any two of voltage, current, resistance and power and returns all four (V = IR, P = VI = I²R = V²/R). The combine endpoint computes the total of resistors, capacitors or inductors wired in series or parallel — resistors and inductors add in series and combine reciprocally in parallel, while capacitors do the opposite. The voltage-divider endpoint computes the output voltage of a two-resistor divider and the current through it. The reactance endpoint computes capacitive reactance (Xc = 1/2πfC), inductive reactance (XL = 2πfL), the LC resonant frequency, and the RC or RL time constant. Everything is computed locally with exact formulas in SI units, so it is instant and private. Ideal for electronics design and education, embedded and hardware engineering, hobby and bench projects, and physics teaching. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 5 endpoints. This is circuit maths; for resistor colour codes use a resistor API and for general unit conversion use a unit API.

api.oanor.com/ohmslaw-api

 Newegg API — oanor API marketplace

Newegg API

Live product search from Newegg.com, the major electronics & tech retailer. Search any keyword — laptop, rtx 4070, ssd — and get the product listings with title, brand, model, current price, original price, image, rating, review count, in-stock status, seller and the Newegg product URL. Prices are live USD. Ideal for shopping, price-comparison, deal-tracking and e-commerce dashboards.

api.oanor.com/newegg-api

Frequently asked questions

Quick answers about pricing, quotas, and integration.

How do I get an API key for AC Impedance API?
Sign up for free at oanor.com, generate an API key from the developer dashboard, and call AC Impedance API with the x-oanor-key header. No credit card needed for the free tier.
What's the rate limit for AC Impedance API?
Free tier allows 1 request per second. Paid plans scale up to 50 requests per second on the Mega tier. Hard limits return HTTP 429 above the quota — no surprise overage charges.
How much does AC Impedance API cost?
AC Impedance API has a free tier with 100 calls / month. Paid plans start at €8.00 / month with higher quotas and faster rate limits.
Can I cancel my subscription anytime?
Yes. Plans are billed monthly and you can cancel anytime from your billing dashboard. No long-term contracts and no cancellation fee.
Is AC Impedance API GDPR-compliant?
All requests to AC Impedance API go through our EU-based gateway. Your upstream API key never leaves our server and no personal data is shared with the upstream provider beyond the request you send.

Pick an endpoint from the list on the left to see its details and try it.

Code snippets

Sign up to get an API key, then call any path under your slug.

curl https://api.oanor.com/impedance-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/impedance-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/impedance-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/impedance-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Ratings

Sign in to rate.

No reviews yet.

Discussion

Ask questions, share usage tips, get answers from the provider and other developers. Public — anyone can read.

Sign in to start a thread or reply.

Sign in

New thread

/ 4000

📌 Pinned 🔒 Locked

·

· ·

/ 4000

🔒 This thread is locked — no new replies.

  • No threads yet — start the discussion.

Support

Private 1:1 support with the provider — billing questions, integration issues, account problems. Only you and the provider team can see these threads.

Sign in to open a support ticket.

Sign in

Open new ticket

Describe what you need help with. The provider team gets an email and replies on the ticket page.

  • No tickets yet for this API.

Subscription active — calls can start immediately.

Send your first request —

Subscription active — copy a snippet and fire off your first call.